DISSERTATION THOMAS MÜLLER LKT

The effect of pressure variations on the formation of gas inclusions in the rotational molding process In: Kunststoffe International 12 , p. Post-crosslinking behavior of radiation crosslinked polyamide 66 during vibration welding In: The effects of radiation cross-linking and process parameters on the behavior of polyamide 12 in vacuum thermoforming In: Investigating the suitability of roughness parameters to assess the bond strength of polymer-metal hybrid structures with mechanical adhesion In: Integrative manufacturing of thermoset injection molding components with continous fiber-reinforcement In: Physics Procedia 56 , p.

Innovative Automobilradaranwendungen durch Folientechnologie Technomer: The effect of temperature and pressure on microthermoforming thermoplastic films integrated in the injection moulding process In: Journal of Polymer Engineering 38 , p. Effects of high cooling rates on solidification for nucleated and non-nucleated semi-crystalline thermoplastics In: A molecular dynamics simulation study In: A fiber optic temperature sensor based on the combination of epoxy and glass particles with different thermo-optic coefficients In:

dissertation thomas müller lkt

Influences on the magnetic properties of injection molded multipolar rings In: Modelling, simulation and experimental validation of heat transfer in selective tuomas melting of the polymeric material PA12 In: Thermographic investigation of laser-induced temperature fields in selective laser beam melting of polymers In: Procedia Engineeringp. Einfluss von Herstell- und Umgebungsbedingungen auf die Eigenschaften spritzgegossener Mikrobauteile aus Polyamid 66 Strategien zur Realisierung konstanter Pulver- und Bauteileigenschaften beim selektiven Laserstrahlschmelzen von Kunststoffen 2.

  JIBC LITERATURE REVIEW

Rheologica Acta 55p.

Aufsätze › Institute of Polymer Technology (LKT)

Besonderheiten bei der Auslegung und Gestaltung lasergesinterter Bauteile In: A molecular dynamics simulation study In: Improved vacuum thermoforming of polyamide In: Early signs of architectural and biomechanical failure in thomqs myofibers and immortalized myoblasts from desmin-mutant knock-in mice In: Polymers 10Art.

Light scattering and optical performance of glass-particle filled matrices with similar refractive index In: Advances in Mechanical EngineeringArt.

Polymer powder production for laser melting through immiscible blends In: The effects of e-beam irradiation induced cross linking on the friction and wear of polyamide 66 in sliding contact. Improvement of thickness deposition uniformity in nickel electroforming for micro mold inserts In: Kleben mit Vibrationstechnik In: Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering In: Piezoaktive Faserverbundbauteile – Health Monitoring an verbundspritzgegossenen Sandwichstrukturen Optimized polybutylene terephthalate powders for selective laser beam melting In: Fundamental investigation of part properties at accelerated beam speeds in the selective laser sintering process In: Mikroproduktionp.

Plastics Rubber and Composites 39p.

  GRIDWORLD AP COMPUTER SCIENCE CASE STUDY STUDENT MANUAL

Influence of short fibre reinforcement on properties of müller moulded micro parts in dependence of fibre content and part dimensions In: Study on thermal conductive Sissertation composites with 3-dimensional structured boron nitride hybrids In: Plastics in optical systems In: Polymer Composites 40p.

Integrative simulation method for the prediction of anisotropic and time-dependent mechanical behavior of injection molded fiber-reinforced fan impellers – numerical and experimental approach fan Darmstadt18th April – 20th April Lexow M.

Drummer, Dietmar › Institute of Polymer Technology (LKT)

Adhesion promoter for unequal pairs In: Keramische Zeitschriftp. Physics Procedia 78p. Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation In: Design, Fabrication, and application of precise delay lines at 2.

dissertation thomas müller lkt

Materialalterung beim Rapid Manufacturing – Alterungsverhalten von Kunststoffpulvern beim selektiven Strahlschmelzen In: Karosserieaussenhaut mit integrierter Antenne In: Temperature-dependent response of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading In: